Mecaplex replacement parts
mecaplex window.jpg (88405 bytes)
Clear sliding side window with
pop-out air scoop. ID: 2316 $284.00

Mecaplex Replacement Air Scoop used on most gliders, light sport aircraft, perfect fit for Extra 300 and Extra 300L

ID: 2313 $164.00

Wings & Wheels Sliding side window
with ventilator air scoop

 the difference? There are some subtle differences in manufacturing and hardware but correct size and contour for direct replacement

Now available, a lower cost replacement side window from W&W
Direct replacement for most sailplanes
Just $239.00
without pop-out vent window.....$130.00

NEW Replacement windows with
vent scoop for L-23 Blanik

Original equipment L23 sliding side window vent scoops are especially fragile in design and easily damaged. W&W now offers complete less expensive
window replacements with sturdier and  newly design vent scoop design.
These vent scoops alone do not fit the original ET sliding windows so a cmplete replacement is required, however, thsi window with teh scoop is less expensive then the LET vent scoop alone at:

Mecaplex sliding window guide rails

Mecaplex sliding window vent rails pair (Pos. 12&13)  ID: 2279 $89.00
Mecaplex Top Guide Rail Pos. 13 ID: 2884 $50.00
Mecaplex bottom Guide Rail Pos. 12 ID: 2281 $50.00
M3x8mm countersunk flathead stainless steel screws ID: 2288 $0.25 ea

Wings & Wheels also represents for the USA:
Josef Weiss Plastic GmbH
Josef Weiss company of Germany is the current manufacturer for many of the new glider manufacturers, as well as canopies for past model gliders

Types available for past gliders:

LO-100, LS 1, LS 3-10, PIK 20,  Zugvogel III, Pegasus (ASW 19/20), Ventus A, Ka6CR, K8/ASK18, DG 100-400, DG 600-800, Mosquito, Hornet,
Club Libelle 205, MBB Junior 208.
Please call for availability and delivery terms

PDF List of canopy types available

Some recent examples offered
Rolladen Schneider LS1f
Alexander Schleicher ASK-13
LO-100 Canopy
Prices do not include side windows, guide rails or vents
Josef Weiss Windows and Vents
(These do NOT interchange with Mecaplex or LP Windows)
Sliding Side Window with pop-out air scoop $250.44*
* special order only, please specify aircraft or glider model when ordering

Weiss Sliding Side Window without pop-out air scoop*
Side Window Guide rails (Pairs only)*
* special order only, please specify aircraft or glider model when ordering
*additional import shipping charges will be added

original factory replacements

Romanian "LARK" IAR IS-28b2,
 Bergfalke IV, Caproni, Diamant, Foka III/IV, Jantar, Ka2, Ka6CR, Ka6E, Ka7, Ka8, LO-100, M-100, M-200, Mistral C, Moswey III, Mucha Std., Ogar, PIK20, Pilatus B-4, Phoebus, RF-4, RF-5, RF-10SF-27, SF-28, SF-34, IS28 and IS29D
Please note: canopies for gliders currently manufactured or still supported buy their respective manufacturers remain the rights of the manufacturers and can only be offered from the glider manufacturer or their dealers.

Canopies and windshields are Drop-Shipped from the manufacturers, shipping costs are not included
Canopies and windshields are Drop-Shipped from the manufacturers, shipping costs are not included. Typical costs for Delivery on one glider canopy from Mecaplex or Weiss Company to the USA will be between $1500-$2000 plus crating charge of about $300.00 - $400 additional.

USA made replacement canopy for
Schleicher K7. K13 canopies also available

canopy.jpg (76871 bytes)

K7 Canopies "click" on images to view larger image

Front Windshield....$185.00
Front Main Canopy $308.00
Rear Main Canopy ..$319.00
Rear Overhead Window $134.00
Rear Side Windows.(Ea)..$68.00
Complete L-13 Canopy....$985.00

available types

image above of USA made 134 canopy
SGS-123 Canopy ..............$475.00
SGS-126 A-B-C Canopy...$485.00
SGS-126 D-E Canopy.......$485.00
SGS-134 Canopy ..............$665.00
SGS-136 Canopy.............. $649.00
SGS-233-233A Canopy.....$485.00
SGS233 Top Window ........$235.00
* 1-26 Canopies:
Specify A,B,C or D,E models
2-33 or 2-33A
W&W Can offer at excellent prices nearly all types of Aircraft windshields and window sets

PA25 Pawnee Windshield......ONLY $190.00
Citabria/Scout Windshield.....ONLY $294.00
PA18 Super Cub Windshield.ONLY $239.00
Others available......Please call
Note: not all canopies and windshields are available with
FAA PMA or TSO. Certain canopy types will require a copy of the Owner Operator form to be competed prior to manufacturer.

Foam/Sealing tape
This is an adhesive backed, closed cell foam tape which is available in various sizes by the roll. This tape can be wrapped around the edges of the windows to both cushion and seal. Piper used this extensively in their window installations, recommended for  installation of any canopy, window or windshield attached with mechanical fasteners.
1 1/4" wide, 1/16" thick with single side adhesive
25' roll
SP-FT114125 $18.75

Special Acrylic Drill Bits
 Our drill bits are specially sharpened to scrape a clean hole in your acrylic window. These drill bits will not chip or crack the acrylic like standard drill bits. They are available in individual sizes from 1/8" to 1/2" and 1/2" 100 degree countersink. Sets with countersink and index box take the guesswork out of which bits to purchase. This type of bit is required when drilling windshields and windows is specified. Remember that acrylic expands and contracts, so drill your holes oversize.
1/8" SP-D18 $5.00
9/64" SP-D964 $5.50
5/32" SP-D532 $6.00
3/16" SP-D316 $6.50
7/32" SP-D732 $7.00
1/4" SP-D14 $7.50
9/32" SP-D932 $10.00
5/16" SP-D516 $10.50
3/8" SP-D38 $11.00
7/16" SP-D716 $13.00
1/2" SP-D12 $16.00

Info on Canopy Care


Micro-Mesh® is what we like to call a non-abrasive abrasive. It is considered a cushioned abrasive in fact.
Conventional sandpaper is designed to be aggressive so that it will dig deeply. In its manufacture the crystals are electrically charged so that they will stand up. They are locked into a hard resin and when you apply the paper to a surface it will literally tear in and remove the substrate of the material you are sanding. The crystals cut in a negative raking motion, leaving inconsistent scratch patterns.
Micro-Mesh® does the opposite. The backing is long lasting cloth to which an ultra-flexible cushioning layer is applied. This cushioning layer will determine how far forward you can push crystals before they will penetrate the cushioning layer. On top of this layer, we have a very resilient glue, not a hard resin, but a completely flexible glue that will hold the crystals while allowing it to move and rotate. The crystals can turn in any direction without coming loose. When you start to apply pressure to sand with Micro-Mesh®, the crystals will go into the cushioning layer while beginning to cut a bit. If you push harder, they will go further into the cushioning layer, which serves as a safety valve. It determines how much pressure you can exert in a doward direction. Instead of a deep scratch that sandpaper makes, Micro-Mesh® produce a refined scratch that is close to a RMS of 1.0. The cushioning layer also allows the crystals to cut with a planing motion that leaves an extremely consistent scratch pattern and allows you to achieve extraordinary levels of gloss.
Where conventional abrasives will take surfaces down 2 or 3 thousandths (.002 or .003), Micro-Mesh® will take it down one ten thousandth (.0001) or less.


This kit will remove minor scratches and scuff from 100 square feet of acrylic.
Kit contains:
2-5" Loop back discs, MICRO-MESH 1500
2-5" Loop back discs, MICRO-MESH 2400
2-5" Loop back discs, MICRO-MESH 3600
1-5" Extra Soft hook face back-up pad with drill arbor
1-5" TufBuf lambswool polishing pad
1-5" White sponge polishing pad
1-8 oz. Anti-static creme
2-Cotton flannel cloths
ID: 2128


note: this is not the small hobby kit sold elsewhere but a complete
hand polishing scratch removal kit for small acrylic jobs up to 30 square feet.
Kit contains:
1-3" x 6" Sheet 1500 MICRO-MESH
1-3" x 6" Sheet 1800 MICRO-MESH
1-3" x 6" Sheet 2400 MICRO-MESH
1-3" x 6" Sheet 3600 MICRO-MESH
1-3" x 6" Sheet 4000 MICRO-MESH
1-3" x 6" Sheet 6000 MICRO-MESH
1-3" x 3" Foam Sanding Block
1-2 oz. Bottle MICRO-GLOSS
2-Flannel Cloths

ID: 2131


cleaners.jpg (8613 bytes)Conventional Plastic Cleaners
Plastic-cleaning products have often proven to be less than satisfactory.
Existing cleaners are often messy to use (especially creams and pastes) and require several steps to apply. They have to be rubbed on and buffed. They often leave a sticky, tacky or oily residue. And, in many cases, they're abrasive, leaving small lines in the plastic.
Dissatisfied with these cleaners, many people resort to products that are alcohol, ammonia, or petroleum-based. Unfortunately, these products can dry out plastic, leading to cracking and
discoloration over time.
Using the products specifically designed for acrylic (plastic) canopies, windshields and windows
can help to prevent these problems and even improve some  conditions.

New Sontara window wipes
ade of a proprietary blend of fibers that are softer than most conventional wipes. Since many scratches are caused by grit and dirt already on the surface of the window, this product features aperatures that help pick up and remove dirt effectively. Using LP Aero Plastics Acrylic Polish and Sealant to "float up" the dirt before wiping is the best way to minimize the risk of scratching.

Nothing Takes Off Dirt and Grit Like Rugged New DuPont Sontara AC Window Wipes and LP Aero Plastics Acrylic Polish and Sealant.
convenient packs of 20 each ID: 2325 $10.50
or complete case lots (inquire)



A superior no-wax, non-yellowing formula containing polyethylene polymers. This superior product not only gives a super slick surface to your windshield and windows, but can also be used on your entire aircraft, including all the painted gloss surfaces, aluminum and fiberglass. Ease of application and removal is unmatched.

LP polish.jpg (355752 bytes)
LP Liquid Polish
Not the tiny 4-5 oz bottles like others see but in large 16 oz. bottles
ID: 2272 $21.95

210 PLUS Plastic Scratch Remover
A fine liquid abrasive for removing fine scratches. Following
with LP Acrylic Polish Sealant is recommended. 15oz. bottle
ID: 2266 $21.95

210 Aerosol Plastic Cleaner/Polish
For those who prefer the convenience of an aerosol spray without the
high polish of LP liquid 14oz
ID: 2269 $19.95

Plexus logo.jpg (25705 bytes)    Plexuxspray.jpg (8693 bytes)PLEXUS.jpg (11743 bytes)
It just doesn't get much easier or more convenient than this!
CLEANS. Powerful, safe cleaning without abrasives.
PROTECTS. Seals the pores of the plastic, keeping out contaminants and harsh chemicals.
QUICK. Spray on and wipe off application reduces man hours.
CONVENIENT. Aerosol can stores without evaporating and delivers exact amount intended.
EXTENDS WINDOW LIFE SPAN. Decreases window replacement frequency,
reducing life cycle costs.
  ANTI-STATIC. Stays cleaner, longer. 
APPROVED FOR USE. Approved by aircraft window manufacturers. 
7oz Aerosol spray ID: 2322 $19.95

easiest to use for professionals and non-professionals alike!
The Cyclo Orbital Polisher is designed to simulate hand polishing.
Get professional results!
Video.....See it in action!
Swirl Free Finish on Black Paint
Headlight Restoration
The Cyclo Orbital Polisher has been polishing planes, automobiles, and RVs since 1953, when they received patents on their orbital polishing mechanisms. That same year, the company received approval from the US government to polish the military’s aircraft and missiles. The Cyclo Polisher is still used today to polish the Air Force One fleet. With a resume like that, we just had to see what the Cyclo is all about. The Cyclo Polisher is the only dual-head polisher on the market. Both heads move in an orbital motion, counter-clockwise. The idea is to simulate hand polishing but at a much faster rate. Going over a scratch or swirl with both heads ensures that you are attacking it from all sides, so to speak. No matter what angle you look at the paint, you will not see the former blemish. It’s the fool-proof polisher!
The synchronized movement of the Cyclo Polisher’s dual orbiting heads most effectively mirrors the overlapping circular motion of fine hand polishing. The result is a perfectly balanced machine that produces less vibration and a mirror-like finish without swirl marks or risk of damage to paint.
Because of its dual headed orbital design, its polishing heads do not remain in one spot—even if the polisher is held in a stationary position. As a result, there is no heat build up. No burning, marring, gouging, or swirl marks can occur. Even a novice can produce professional-looking results without the risk of damaging a vehicle’s trim pieces or finish.
 Model 5 Dual Head Orbital Polisher/Scrubber/Finisher/Shampooer, 115VAC
The synchronized movement of the Cyclo mirrors that of hand rubbing – an overlapping circular motion. And the Cyclo’s twin heads don’t
spin in one place, so there’s no threat of heat build-up or burn marks. The Cyclo continues to be the polisher of choice for aircraft. In fact it's currently used to polish the Air Force One fleet and most major airline fleets worldwide. The Cyclo delivers a superior polish on mainstream products such as automobiles, boats, even Airstream™ RVs. Car dealerships, automobile detailers, car washes, and fleet users all rely
on the Cyclo to keep their vehicles looking like new.
Cyclo Polisher Product Sheet (PDF)
Cyclo Polisher Instruction Manual (PDF)
Polisher is complete with velcro pad holders, counter weights and tools
Just add your selection of polishing pads
ID: 5832

VES Silver Weighted Insert (20-076)
For use with DoublePrecision adapter and pads and scrub brushes.
VES Yellow Weighted Insert (20-078)
For use with head assembly with bonnets or rubber pad holder with pads.
L Hex-Key Wrench (85-820)
Cyclo Toolmakers, Inc. Vibration Elimination System (VES™) is available exclusively on Cyclo Dual Head Orbital Polishers and is composed of a completely redesigned counterweight and precision matched, weighted inserts. Prior to this innovation the Cyclo Model 5 polisher imparted only about one-tenth the vibration of traditional rotary and dual action polishers. With the introduction of the new Cyclo VES, the amount of vibration is reduced even further and nearly eliminated.

Cyclo VES Counterweight: Completely reengineered, the Cyclo VES counterweight comes installed on all new Cyclo Model 5 Polishers.
VES will be available for Model 5C and 6CE polishers starting in 2009.
Cyclo VES Weighted Inserts: By simply matching the correct VES weighted insert to the intended attachment system configuration -
head assemblies with Rubber Pad Holders or bonnets, carpet and scrub brushes, Quick Connect Adapters with DoublePrecision™ pads, or other Genuine Cyclo attachments - you can nearly eliminate all vibration.

Cyclo Model 5-Pro variable speed Polisher

The Cyclo Toolmakers Model 5-Pro Polisher is our 110 volt machine featuring a new solid state variable speed controller, three year warranty and complete Vibration Elimination System&trade set-up. The Model 5-Pro Series Polisher is designated for use in North America and countries that supply 110 V a.c. power.
Power Supply: 115 Volts, 60 Hertz, 220 Watts
Motor: alternating current, semi-enclosed 24-bar commutator, Output: 1/3 H.P. (.25 Kw)
Variable Speed Range: 650 - 3000 orbits/minute
Weight: 6.5 lb. (2.9 kg)
Head Rotation/Diameter: clockwise/4"
Electric Cord: 10' length, 16 ga/3SJTOW
Housing: heavy-duty cast aluminum
Variable Speed Controller
Complete VES System
Three Year Warranty


Cyclo Model 5-Pro Series Polisher with Rubber Pad Holders
Head Assemblies, VES Yellow, Silver and Blue Weighted Inserts, L Hex-Key Wrench, Flat Wrench.
ID: 5877 $345.00

Buy any Cyclo Model 5 polisher and get
 WX/Block Wx/Seal combination package
for only $44.95!

FOAM Polishing pads
GREEN POLISHING PADS ID: 5838 $10.00 pair
RECOMMENDED APPLICATIONS: • Sealant • Paint Polish • Paint Cleaner • Metal Sealant A more aggressive pad than our white or blue pads. The pore density makes it perfect for polishing and removing light oxidation for a stunning shine.

YELLOW CUTTING PADS ID: 5841 $10.00 pair
RECOMMENDED APPLICATIONS: • Paint Polish/Cleaner • Paint Deox • Paint Compound • Paint Scratch Remover A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishes.

WHITE FINISHING PADS ID: 5835 $10.00 pair
RECOMMENDED APPLICATIONS: • Extreme Shine • Final Wax Buff • Wax Application • Sealant • Metal Sealant This superfine pad is used in final buffing, after polishing with other pads.

RECOMMENDED APPLICATIONS: • Paint Polish/Cleaner • Paint Deox • Paint Compound • Metal/Chrome Polish An exceptional, all-in-one cleaning and polishing pad. This high density pad has the power to remove lights scratches and polish the surface.
All featured pad types just $10.00 Pair

Metal Polish/Cleaner • Paint Deox • Paint Compound • Paint Swirl Removal
The preferred multipurpose wool/poly pad, used for metal polishing and aggressive paint compounding. This pad is excellent for removing swirl marks and scratches.
White Wool ID: 5856 $12.00 pair
Paint Polish/Cleaner • Paint Deox • Paint Compound • Metal/Chrome Polish An exceptional, all-in-one cleaning and polishing pad. This high density pad has the power to remove lights scratches and polish the surface. ID: 5853 $12.00 pair
Paint Polishing • Paint Cleaner • Finishing Touch Used for applying the finishing touches on most automobiles. A blend of 70% acrylic and 30% wool, this wool pad is perfect for creating a fine luster on nearly any finish. ID: 5850 $12.00 pair



Microfiber Suede Pad Cover
 fits over foam or wool pad

Extreme Shine :An ultrasoft cover used for final touches. Removes all surface residue
More Info

Pad Cover (73-515)
ID: 5959 $12.00 pair

Microfiber Terry Pad Cover
fits over foam or wool pad
Final Wax Buff
The preferred cover for applying polish and buffing wax. Its hooked fibers remove surface residue
More Info
Pad Cover (73-530)

ID: 5865 $12.00 pair


Final Wax Buff • Upholstery
A 100% cotton terry cover. Perfect for cleaning interior surfaces and for buffing, polishing, and drying exterior surfaces
More Info
Pad Cover (73-550)

ID: 5865 $12.00 Pair

Rubber pad holders

Part# 79-101a
Rubber base with Velcro hook material that fits over Cyclo polisher heads and allows the attachment of any of our Velcro loop pads in addition to the 600 grit Fast Cut Pad. Two per machine are required, and they will last for months of continuous use.
(2 included with
ID: 5871 $22.00 pair
  79-112-5/16 ProGuard™ Orbital Backing Plate
New from Cyclo Toolmakers. The ProGuard Orbital Backing Plate features a plate-integrated hook field unlike other backing plates. Low profile for improved control and a non-marking bumper for safe operation. The advanced design ensures against delamination, allows for faster pad centering, and is perfect for quick and easy pad changes (79-112-5/16).
ID: 5874 $20.00 each

The PERFECT Tool for applying Wx/ Block and Wx/Seal!
Save! 25% off Wx/Block and Wx/Seal Package with the purchase of a
New improved Wx/Block now features
the latest nanotechnology

after a long delay and 100's of back-orders
Weather Block (Wx/Block) and Weather Seal (Wx/Seal)
 is on the shelves and shipping again!
(weather block- weather seal)

You loved it'll love it even more now!

Premium Protection for Sailplane Finishes
New improved Wx/Block now features the latest nanotechnology to enhance the gloss and longevity
of sailplane gel coat finishes.
This  premium finish protection contains maximum levels of UV protection along with gloss enhancing and anti-static surfacing agents for gel coat . finishes. Wx/Block helps maintain a high level of sailplane gel coat integrity by reducing the effects of environmental exposure.

Nanotechnology Improves Performance

The inclusion of nanoscale particles in Wx/Block and Wx/Seal improves smoothing and levels the microscopic inconsistencies on gel coat surfaces.Leveling of the surface topography results in a higher gloss and better sealing of the micro-porosity present in all gel coat finishes. The nanoscale formulation improves the refectivity of gel coat surfaces resulting in increased gloss values and provides better retention of UV active inhibition for improved performance.

Gel Coat and the Sun

Gel coat finishes are subject to chemical processes driven by exposure to ultraviolet solar radiation ,this incudes photo-initiation and photo-oxidation. The process of photo-initiation causes chemical changes in a micro-thin surface layer of gel coat while photo-oxidation degrades surface molecules.Sunlight and reactive atmospheric compounds will yellow and embrittle gel coat over the length of exposure. While traditional hard wax or consumer type waxes will polish gel coat, their UV protection is limited. Wx/Block’s solution is to provide active UV protection on the surface for an extended period of time.

Wings & Wheels made an exclusive agreement with the manufacturers of Wx/Block
to make this great product for sailplane owners and owners of other *gel coated composite aircraft.
Wx/Block and Wx/Seal products are available ONLY through Wings & Wheels

This might explain why the only people who don't recommend Wx/Block and Wx/Seal are some glider products dealers who cannot offer it!
Used and recommend by hundreds of satisfied customers,
sailplane repair shops and gliderport operators.
* Though Wx/Block was developed to improve the durability and life span of sailplane gelcoats it is also a terrific product to use on other materials and finishes. Wx/Block provides UV and moisture protection not commonly found in other waxes and polishes.

Wx/Block and Wx/Seal are specially formulated to protect Sailplane Finishes. The surface protection contains maximum levels of UV inhibition, along with gloss enhancing and anti-static surfacing agents SPECIALLY designed for gel coat finishes. Wx/Block was designed to help maintain a high level of gel coat integrity by reducing the effects of environmental exposure. Wx/Block is completely safe for all gel coats, polyester based finished (Prestec or Duratec) or urethane paint finishes.
The Wx/Block block system is extremely easy to apply, just wipe on and hand buff for an outstanding gloss finish. Wx/Block is also perfect for daily clean-up and bug removal.

Wx/Block and Wx/Seal is an easy to use 2 part system. First, Wx/Seal is applied as a surface sealing and  cleaning compound, which conditions the surface. All Gel coats contain microscopic porosity. The Wx/Seal cleans residual dirt and wax from the surface and seals these porosity's actually helping the Wx/Block adhere to the surface. Wx/Seal may be applied by hand or if you prefer by machine. Finally, Wx/Block is applied by hand which contains the UV Blocking and Anti-Static agents which help to protect the finish. These agents also produce lower surface tension than standard waxes and reduce the severity of bug sticks and dust accumulation.
Combination Wx/Block & Wx/Seal (1 Quart each) $59.95 
Just $44.95 when you buy any Cyclo
Wx/Block ID: 5896 $35.00 Per Quart
Wx/Seal  ID: 5899  $35.00 Per Quart

Combination Wx/Block & Wx/Seal (1 Quart each) ID: 5893 $59.95 

(combination package is enough to do two 15 meter gliders)
(Wx/Block only available in Quarts)

Wx/Block and Wx/Seal are both 100% free of Silicone

for more information
go to

Technical report:
Enhancing Gel Coat Longevity

With Advanced Surface Chemistry Technology

and also read:
Wx/Block Brouchure

Not meaning this as advertisement but I want you to know what we have observed
on a refinished LS-3A. One expects UV to attack the upper surfaces of a
glider. Normally, the upper surfaces tend to fade and "yellow" more than lower
surfaces. The owner of this LS-3 used "weather block" on the upper surfaces
only and we can see...with no doubt, that the upper surfaces are in better
condition after about 5 years. The lower (un treated) surfaces are now an
"off-white" (or yellowed slightly) while the treated upper surface is a nice
"blue-white" . You can come to any conclusion you want...but this Weather
Block" stuff does make a difference in protecting a fiberglass Gel-Coated
finish....End of advertisement...Regards, Bob

Hard Bar (Wax?)
You may hear a lot about "Hard Waxing" but what most don't know is that hard bar was is really not intended as a wax at all, hard bars do contain a wax as a base but these are really polishing compounds, the wax used is there to contain the fine abrasives used for polishing, much the same as "Jeweler's rouge" . Applied with a machine only, on sailplanes a special edge buffer is used and it is still a favorite method by many repair shops. Machine polishing hard bars do provide excellent  polishing,  and provide a high shine since the surface is highly polished to a super smooth finish. Hard Bars however provide little real moisture protection and will offer virtually nothing in the way of UV protection. Each Bar should be enough for complete polishing of one or two gliders when properly applied. The special edge type buffer is required for proper application of all hard bar waxes. Hard Bar Finishing should always be followed up with a minimum of a good wax for moisture protection and for the best UV and moisture protection with a product like or at best, the Wx/Seal and  Wx/Block products.

German import

schwabbelwachs (Polishing wax)
our coarsest bard wax (much like jewelers polishing rouge)

1 bar, ca. 900 g ID: 5807 $30.00

 FYI: Removing old tape residue

I don't offer this since it is flammable and could be classified as "hazardous" for shipping (extra cost to you) you can almost always find it locally at most auto parts stores, hardware stores and paint suppliers for about ten bucks a quart. Some companies offer their own "brand" like NAPA Auto Suppliers. This is the BEST adhesive cleaner I have ever used for removing old tapes, tape residue and is completely safe for almost any painted or gel-coated finish.
Buy it locally.. always keep some on hand!

go to to the home page Browse the catalog  go to next page
Back to Index