LX NAV FLIGHT DATA COMPUTERS

NEW LX NAV V80!
Finally V80 indicator is available. V80 indicator can replace existing vario indicator and Flarm graphic display together.V80 is not available as standalone instrument, but it can be connected to LX8000, LX8080 and LX9000


Features
•ARM Cortex-M4 processor running on 160MHz
•External SD card for configuration, firmware update
•3.5'' QVGA sunlight readable screen with 1200nits
•3 push buttons for setting adjustments
•ALS (ambient light sensor)
Input and output
•RS485 bus
•CAN bus
Power supply •Power input 6-18V DC •Consumption ~100mA at 12V
Size and weight •81mm x 80mm x 45mm •Weight: ~260g
No price or additional data yet..please stand by for more!

V3 standalone digital audio vario
in stock now
High performance, stand alone, simple digital vario, altimeter and speed to fly calculator.

Available in Metric or US Knots/Feet scales
Standalone digital vario meter with speed to fly • Standard dimensions - 57 mm diameter (2¼)” with depth only 50mm • Extremely bright 2” (5 cm) color display readable in all sunlight conditions with the ability to adjust the backlight • One rotary switch (knob) with push button function is used for input • Pre-loaded polar database for almost all gliders • Mechanical needle driven by stepper motor indicating vertical speed • Many custom audio settings • 100Hz sampling rate for very fast response • Internal speaker • Power input 6-16 V DC • Power consumption typical 110mA • Weight 156 g
Features
High accuracy (cm) variometer and altimeter.
Preloaded almost all glider polars
Fast manipulation an settings with one rotary knob
Logbook
Display of 3 different values (set by user)
Hardware
ARM processor
Mechanical needle driven by stepper motor
QVGA (320*240pixels) sunlight readable display
Digital temperature compensated altitude pressure sensors 
Smooth audio output
Integrated speaker
Input and output
Rotary knob with push function for Mc,Bal,Bugs and other settings
Audio output
Serial RS232 input/output
Power supply
95mA-135mA at 12V depending on LCD brightness, without audio
Size and weight
81mm x 81mm x 50mm 
Weight: ~156g
 ID: 5588 $695.00
Manual

LX Nav V7

Available in Metric or US Knots/Feet scales
The LXNAV V7 is a standalone digital speed-to-fly variometer and final glide calculator with GPS input and PDA/PNA input/output
Mechanical needle driven by stepper motor allows fast response and very accurate vertical speed indication
A two-inch 320x240 sunshine readable screen displays user adjustable parameters
An integrated rotary switch with push button is used to setup all the parameters
 integrated g-meter • Flarm clock screen with acoustic warning (when connected to Flarm device)
Integrated logbook
A second indicator with rotary switch and push button can be connected to V7 for double-seated aircraft
V7 Brouchure and Specifications
included:
LXNAV V7 (in Metric or Imperial units as specified)
Main power cable for V7 + CAN terminator
Speaker
PDA cable – generic RS232
GPS cable – generic RS232

LXNAV V7 peed-to-fly variometer and final glide calculator with GPS input
ID: 5591 $1475.00
LXNAV V7D second seat Repeater
$550.00

V7 Manual and installation
available additional cables:
CC-NP-LX Connection cable,V7 GPS to Nano Power
V7-GPS-232 Connection cable,V7 GPS to Generic RS232
V7-GPS-IGC Connection cable, V7 GPS to IGC FR with RJ11 type
V7-GPS-PF Connection cable,V7 GPS to Power Flarm
CC-NP-OUDIE1 Connection cable, V7 PDA to Oudie
CC-NP-232 Connection cable, nano power - generic RS232
CC-NP-38 Connection cable, V7 PDA - Ipaq 38xx/39xx/47xx
CC-NP-IPAQ310 Connection cable, V7 PDA - HP31x
CC-NP-LX Connection cable, V7 PDA - MiniMap
 

BlueTooth module for V7

Specially designed bluetooth module for LX Nav V7
Reduces one cable to PNA
Plug and play installation.
Makes communication between V7 and PNA even easier
ID: 5592 $95.00

LX9000

Metric or US Knots/Feet scales
Color display 262144 colors  5.6" (14,2cm) screen size  640 by 480 (VGA) pixel resolution  1200 cd brightness
The LX 9000 is a high end vario navigation system with extremely bright color 5,6” display, running on well proven LX 8000 firmware with multilanguage interface. Simple and logical user interface is designed for top-level competitors, club operation as well as for gliding beginners. Instrument is preloaded with worldwide terrain maps, airspace and airports databases. Integrated FLARM collision avoidance system and flight recorder according to the highest level IGC specification. It manages complex tasks with assigned areas manipulation and real-time flight optimization according to FAI and OLC rules.
Extremely bright color 5.6" VGA display readable in all sunlight conditions with backlight automatically adapted using photo-sensor Running well proven LX 8000 firmware with Linux operating system and
lx9000cutout-smlmultilanguage user interface
8 push buttons and 4 rotary switches are used for input which compromise well known LX user interface. Remote stick is available optionally for more comfort
Preloaded with worldwide terrain maps, airspace and airport databases
Simple and user-friendly update of databases using integrated SD Card or USB
Integrated flight recorder according to high-level IGC specification
Flights stored in IGC format are downloadable using integrated SD Card
Support for multiple waypoint and task databases with virtually no limitations
Manage complex tasks with assigned areas
Real-time flight optimization according to FAI and OLC rules
Rich full flight and task statistics
Integrated FLARM collision avoidance system with graphic, sound and voice (optional) presentation ***
***FLARM is not approved for use in the USA at this time
Size and weight
Display unit 145mm x 113mm x 38mm (WxHxD)
Vario unit fits 57mm x 115mm depth
Weight: ~565g (without vario unit)

ID: 5556 $4850.00
*Please call for special promotional price
LX9000 w/FLARM (not yet available for sale in USA)
ID: 5562 $5555.00
LX9000 Rear Seat Repeater ID: 5565 $2450.00

Download LX 9000 cutout (PDF file)

Manual  Brochure


LX 8000
 Metric or US Knots/Feet scales


New HpH 304S with LX8000 installed
The LX8000 is a high end vario navigation system with extremely bright color display. Simple and logical user interface is designed for top-level competitors, club operation as well as for gliding beginners. Instrument is preloaded with worldwide terrain maps, airspace and airports databases. User friendly data exchange is done using SD Card or USB interface. LX8000 has already integrated FLARM collision avoidance system and flight recorder according to IGC specification for all flights. LX8000 copes with complex tasks with assigned area. During flight optimization according to FAI and OLC rules are shown.
* FLARM is not approved for use in USA and is not included. FLARM option is special order, extra cost, for use outside the USA and Canada only.
 LX8000 Manual
http://www.lxnav.com/products/lx8000.html
ID: 5535 $4595.00*
w/Flarm ID: 5538 $5295.00
(not yet available for sale in USA)
LX8000 D (Rear seat repeater) Wiring, RS485splitter , LCD vario indicator included ID: 5539 $2450.00
 

LX 8080
Color navigation and vario system
available now!
LX8080 is LX8000 packed into smaller 80mm housing with 2.8" screen. It has all benefits from LX8000 software including full customization, preinstalled maps, powerful processor, IGC approval to highest level, Linux etc

The LX8080 is a high end vario navigation system with extremely bright color display. Fits to standard 80mm hole. Simple and logical user interface is designed for top-level competitors, club operation as well as for gliding beginners. Instrument is preloaded with worldwide terrain maps, airspace and airports databases. User friendly data exchange is done using SD Card or USB interface. LX8080 has already integrated FLARM collision avoidance system and flight recorder according to IGC specification for all flights. LX8080 copes with complex tasks with assigned area. During flight optimization according to FAI and OLC rules are shown. Exactly the same software as running on LX8000 and LX9000.

Display unit features
Extremely bright color display readable in all sunlight conditions with backlight automatically adapted using photo-sensor
Using Linux operating system (not CE Windows) ensures fast and stable operation of firmware
6 push buttons and 4 rotary switches are used for input which compromise well known LX user interface. Remote stick is available optionally for more comfort
Multilanguage user interface
Prepared for integrated help
Preloaded with worldwide terrain maps, airspace and airport databases
Simple and user-friendly update of databases using integrated micro SD Card or USB
Integrated flight recorder according to high-level IGC specification
Flights stored in IGC format are downloadable using integrated micro SD Card
Support for multiple waypoint and task databases with virtually no limitations
Manage complex tasks with assigned areas
Real-time flight optimization according to FAI and OLC rules
Rich full flight and task statistics
integrated FLARM collision avoidance system with graphic, sound and voice (optional) presentation
Color display
262144 colors
2.8" (7.1cm) diagonal screen / 320 by 240 pixel resolution
sunlight readable TFT (1200 cd)
Hardware
ARM processor with 800 MHz clock
4 Gb storage memory
6 push buttons and 4 rotary switches
16-channel uBlox GPS receiver
FLARM transmitter and receiver
Engine noise level sensor
Pressure altitude sensor
Input and output
Integrated SD card reader
Serial RS232 interface
RS485 bus interface
FLARM interface
USB interface
Optional Accessories
Rear seat device LX8080D
Remote stick
High precision compass
Voice module
Additional external vario LCD
External FLARM display
Power and battery
Current drain display unit 330mA at 12V
Current drain vario unit 120mA at 12V
Smart power management
Automatic backlight regulation
Size and weight
Display unit 81mm x 81mm x 65mm depth
Vario unit fi57mm x 115mm depth
Weight: ~400g (without vario unit)
ID: 5549 $4295.00 without FLARM
$4995.00 with FLARM (not for sale in USA)
LX8080 D (Rear seat repeater)
Includes wiring, RS485splitter and  LCD vario indicator 
$2350.00

V5 Variometer included with all new LX8000, LX8080 and LX9000 systems
(upgrade for earlier versions of these systems is available)
Available in Metric or US Knots/Feet scales

Data sheet

AHRS  (Attitude and Heading Reference System)
AVAILABLE AS AN OPTION FOR
LX9000, LX8000 or LX8080

AHRS is now available as an option for LX9000, LX8000 or LX8080. It can be connected through USB port and it will be recognized automatically. A setup menu in (Setup->
Hardware->AHRS) is used to calibrate installation error and to adjust pitch.
LX AHRS (Attitude and Heading Reference System)for LX9000/LX8000/LX8080 (AA necessary cables to connect LX9000/Lx8000/LX8080)
ID: 5559 $1550.00
Instruments or devices equipped with any form or AHRS system (Artificial Horizon) or Instruments that could be used for "Cloud Flying" that cannot be completely disabled or removed are not permitted in any
SSA sanctioned competition!

More details are available on link above or may be found on Contest Rules and Rules Committee Documents

FlarmView
shows traffic information provided by FLARM or ADS-B devices




Flarmview shows traffic information provided by FLARM or ADS-B devices. It displays also climb rate, altitude and distance for selected target.
It uses FLARMNET database for friendly target names. Four buttons easy operation even when wearing gloves.
Main features
Color display
QVGA resolution 320*240 pixels
Sunlight readable
Small size - Dimensions(W x H x D): 65 x 42 x 9 mm
Extremely slim 9mm
Loud acoustic warning
Color warnings
A/C MODE traffic (undirected warnings)
Supports latest flarm dataport specificationVer.6
Compatible with Flarm and PowerFlarm
FlarmNet database + User database
intuitive user interface
12V supply (may not work on old hardware designs, where only 3.3Volts are provided. For such cases we offer an adapter)
(12Volt version, SD card and 50cm Flarm cable)
Please specify, if you wish Power flarm cable instead of standard Flarm cable.
$275.00

New ergonomic remote stick
with 7 push buttons and joystick for easier navigation

LXNAV remote stick is designed for three different versions. 
Shempp Hirth version with red starter button for M gliders
EB28 version with trim switch
Standard remote stick is also designed for different diameters of command handles.
19.3mm (DG, LAK)
20mm (SH, LS, Stemme, Apis, EB29)
24mm(Schleicher, Pipistrel Taurus, Alisport Silent, EB28)

25,4mm (JS)

from $295.00 - $425.00
Please inquire for which glider type, stick diameter and options
Manual

FAI/IGC APPROVED GPS DATA-LOGGERS
16
goto previous page Browse the catalog goto next page
Back to Index