Pre-wired Cable Harness
assemblies are color coded and letter marked
for simple "plug-in" installations when used with optional
loudspeaker/junction boxes and microphones.
Walter Dittel FSG71M cable//harness.............$155.00

 

Loudspeaker/Junction Boxes

Pictured above: Top (white) Becker,  lower left (beige) Filser LSJB, lower right (black) Walter Dittel
Complete with speaker, (2) DIN microphone jacks in a sturdy housing the Loudspeaker/junction box makes simply installation between radios and accessories. Color-coded and letter marked terminal connectors for simple hook-up when used with factory pre-wired harnesses without soldering.
Walter Dittel Loudspeaker/Junction Box $175.00
Becker Loudspeaker/Junction Box $197.00
Filser Loudspeaker/Junction Box (compatible also with Becker) $149.00

Special
ONE ONLY, Older type
Walter Dittel loudspeaker/Junction box

(old type) NEW SURPLUS PART....ONE ONLY
works and wires identically to newer more compact type
Simple plug in or Walter Dittel harness to terminals (pre marked) in LSJB
$119.00
 

W&W Pigtail lead for FSG70 FSG71 FSG2T and FSG90

Cut installation time in half!
Only a few left
$70.00

BECKER

Cable harness for AR4201 labeled and ready to install with your
components (Speakers, Microphones, PTT, power/ground)
$189.00

Becker AR4201 plug n' play set-up cable/harness for use with Becker loudspeaker/junction box
 for use with single or two seat sailplanes
$199.00

Microair M760 Wiring Harness

The M760 wiring harness makes your installation much easier. The harness wires out all of the M760's features, and includes, buttons, and switches. The glider harness is prepared for gooseneck Boom Microphone installation.
M760 Cable harness for aircraft including microphone and headphone jacks $188.00
M760 Intercom Cable harness for aircraft including microphone and headphone jacks and additional cables for intercom $204.00
Single seat glider harness when purchased with the M760 transceiver $159.00
Two seat glider harness $204.00

Microair SP01 Box Speaker

This small speaker is housed in an attractive black grill box. The SP01 is 8 ohm,
5 watt, and terminated with a 2m shielded wire lead.
$35.00
Several other speaker options on page 5

Push-To-Talk Switch/Harness

Expensive, but very high quality, made to last, all metal  momentary, normally open, with "click" (feel- hear)
feature and three meter shielded cable...$64.00
Same metal PTT switch with "click" feature w/o cable.......... $49.00

Miniature, momentary, normally open  PTT (push to test, push to talk) switch,
black button si lower cost and good quality
MSPS103C0 $6.95

Toggle Switches

Miniature Toggle switches are used for a variety of applications
 Part 683-0267 is a miniature ON/OFF toggle switch $5.95
 Part 683-0268 is a miniature toggle switch, ON-ON positions like used for switching from one component to another
or from one power source to another $7.95


Terminal Barrier Strips
Available from Stock in
8 Position Terminal Strip with 4 terminal jumpers included $5.95
12 Position Terminal Strip with 4 terminal jumpers included $5.95
16 Position Terminal Strip with 4 terminal jumpers included $6.95
Microphone and Headphone Jacks and plugs

PJ068 3/16" 3 contact microphone plug $16.95

1/4" 2 contact headphone plug $9.95


JJ033  3 conductor Aviation Mic Jack....$7.50
JJ034 2 conductor Aviation Headphone Jack $6.50

The AG mic & phone jack housing

are made from aluminum, painted with a crinkle finish (AG-JH1)
Jacks not included.
$19.95
BOOM (Gooseneck) MICROPHONES
please click on this text link for microphones
 

DYNAMIC BOOM MICROPHONE
 AMPLIFIER

From Telex an amplifier usable with Dynamic Gooseneck "Boom" microphones   for users of
U.S. (and other) manufactured transceivers designed to operate only Carbon or Electret microphones.
Amplifier is a printed circuit board and requires connection between dynamic microphone
and transceiver and is shipped without housing.
Please call for recommendations prior to ordering for any special applications...
Basic Amplifier ..... $58.00

DIN CONNECTORS

*substantial savings can be had by purchasing the Filser Goosneck microphone
and installing appropriate DIN connector if needed.
(only needed when Loudspeaker Junction box is used)
Becker type type DIN connector 5 pins at 180 degree $14.00
Walter Dittel type DIN connector, 5 pins at 270 degree $14.00
Also available
Din connectors for Battery boxes and other accessories
2 PIN with centering lug at 180 degree (WD Battery box)$14.00
3 Pin 180 degree (Filser battery box) $14.00
DIN Sockets
Ideal for panel mounting, quick-disconnect electrical connections with locking ring
Use for panel mounted battery charging, removable panel set-ups or with microphones

2 PIN with centering lug at 180 degree  (Walter Dittel battery box type) $10.85
5 pins at 270 degree female panel mount socket $10.95


Walter Dittel Hand Microphones

Suitable for any transceiver designed to accept "unamplified dynamic" microphone input.
Connects directly to Walter Dittel Loudspeaker/Junction box and Walter Dittel portables or available with 5 pin DIN Connector separate for panel mounting.
$85.00
Panel mount Din receiver $14.00

Walter Dittel battery box

Similar to Filser battery box but made of stronger Stainless Steel and high grade powder coated steel construction complete with voltmeter and DIN Connector outlet socket and one mating DIN connector plug *, Voltmeter with PTT (push to test) button and circuit breaker. Battery is NOT included but accepts most common 12 volt batteries of 6.5 -8.0 Amp hr. like Powersonic batteries listed above or commonly available batteries from many manufacturers.
$269.00
additional WD DIN Connectors available $14.00 each

More installation supplies on this page
 http://www.wingsandwheels.com/encoders.htm