LX
8000
The LX8000 is a high end vario navigation system with flight recorder.
Large bright color 3.5" / 1200cd TFT display.
The LX8000 is a high end vario navigation system with extremely bright
color display. Simple and logical user interface is designed for top-level
competitors, club operation as well as for gliding beginners. Instrument is
preloaded with worldwide terrain maps, airspace and airports databases. User
friendly data exchange is done using SD Card or USB interface. LX8000 has
already integrated *FLARM collision avoidance system. A flight recorder
according to IGC specification for all flights.* LX8000 copes with complex
tasks with assigned area. During flight optimization according to FAI and
OLC rules are shown. * FLARM is not approved for use in USA and is not
included. FLARM option is special order, extra cost, for use outside the USA
and Canada only.
LX8000 Manual now
available
http://www.lxnavigation.si/avionics/products/lx8000.cfm
LX7007 or LX7000 is upgradeable to LX8000 (vario unit with complete
wiring remains, only the LX7007/7000 display unit is replaced)
About $5500.00
LX7007 Basic and LX7007 PRO IGC
CLICK ON IMAGE FOR MORE DETAIL
LX7007
New faster processor and more memory
New main unit casing and design.
Direct plug and play hook-up for PDA (cable provided)
$4550.00
The new LX 7007 system consists of two units: one 57 mm and one 80 mm unit.
The highly developed and well proven 57 mm unit remains unchanged and is
exactly the same as with the LX 7000 system. By contrast, the new 80 mm
display unit has been completely redesigned to incorporate the latest
development features of modern micro controller modules. The heart of the
unit is so called "embedded microcontroller core module"
whereby a high power microcontroller, 512 k B RAM (Random Access Memory)
with back up power battery and 1MB flash memory is integrated into the
system. These hardware features guarantee high reliability and availability.
All system-critical data is stored in a non volatile flash memory virtually
ensuring that a system failure is all but impossible. Even a failed back up
battery will have an almost negligible influence on the functionality of the
LX 7007. As with the previous LX 7000, the unit is approved as an
IGC flight recorder without limitation.
A completely new hardware design backed by numerous new firmware features
SD Card Interface -
NEW!
SD Card interface makes
LX 7007 absolute autonomous. All possible data transfers may be done by the
standard SD card. There simply is no need to connect the laptop to your LX
7007 anymore. All units delivered after August 2006 are equipped with the
card reader interface and one SD card. It is also available as a simple and
cost effective upgrade of the existing LX 7007 units. As it is a non
integrated device it may be installed anywhere in the cockpit. The following
SD Card data transfer functions are available:
-
Flight download
-
TP/TSK upload and download
-
Airport and Airspace database upload
-
Flight info (declaration) upload and download
-
Settings upload and download
LX 7007 Basic
Vario navigation system
driven by external GPS source
Features:
Well proven LX 7007 embedded
microcontroller technology
SD card interface as a standard solution (transfer of: TP/TSK, APT, airspace
and settings)
Three physically separated com ports
Input for external GPS, plug and play connectable to: Colibri, LX 20, Flarm,
VL
Any GPS source sending NMEA at 4800 bps acceptable
12V power for GPS source
PDA interface, 5V power and data
Bidirectional data exchange to Colibri or LX20
Almost all LX 7007 pro igc functions except; flight recorder, Flarm, no GPS
built in
Already ready options: Remote control, Second seat configuration, Voice
Module, Compass
Extremely low power consumption: ca.200 mA /12V (without audio)
$3550.00
LX 7000
Display
unit for Cambridge 302
a proven,
state of the art Graphical Display
While
the Cambridge 302 is a good variometer, it needs a graphical display unit if
it is to be used as an effective soaring vario and navigation system. The
Cambridge solution is to couple a PDA to the 302. However, there are many
ergonomic problems with this solution and it is not ideal for mounting in a
glider cockpit. Now LX Navigation have solved these problems by using the
display of the LX7000 Pro and coupling it with a simple serial cable to the
302. The LX7000 display has all the functionality of a PDA but with
improved ergonomics and many added features; all contained in a package
that fits a standard 80mm (3") panel cutout.
The LX 7000 display unit has an excellent pedigree
as it is based on the well known LX7000 Pro vario navigation system which is
a market leader.
The most impressive features are the high resolution graphic display
(160x240 pixels), coupled with the well known LX philosophy of using
intuitive controls comprising four rotary switches and six push buttons.
$1795.00
NEW LX1600
Affordable Variometer, Logger and Navigation system
menu driven by iPaq with FlywithCE Navigator
Stand alone Flight Computer / Vario-Speed to Fly system controlled by PDA
New vario design aproach
Power output to PDA (5V 3A)
Commands are sent from PDA to LX1600 and vise-versa
NMEA input and power output for Colibri or LX 20 (plug and play)
Data exchange PDA – LX 20 or Colibri (TP&TSK, flight info)
Fully compatible to FLY with CE Navigator
Winpilot compatibly in preparation
$1695.00*
*iPaq computer not included
LX 1600 is a microprocessor-driven electronic variometer with digital pressure meters.
All control functions and settings are done from a Pocket-PC software. Basic
settings can be performed with the variometers 4 push buttons.
An
external PocketPC running Navigator software from FlyWithCE
is used to control the variometer functions like volume, MacCready setting etc. LX 20 or Colibri are the ideal choice as the
GPS-source and IGC loggers, but for many (most!) any simple GPS with NMEA can be used to
give you full flight computer functions and even logger functions for most regional
events!
All new LX Navigation instruments come with and communicate though your PC with the new LXe Windows program or well known LX FAI program for DOS.
LX160
Excellent addition to FlyWithCE NAVIGATOR *
Easy to use. simple and straight forward enough for even club glider
operation.
Includes:
LCD Display,
Electric Vario with Audio,
Speed to
fly and Averager,
Final Glide Calculator with NMEA input from GPS,
Easy to read display.
Requires only 2 X 57mm instrument cut-outs,
Read-out in +/- 10 Knots,
Temperature range -20°C to 70°C
Operating voltage 9-16 Vdc
Power consumption: <
110 mA @ 12V
Easy to use 3 position switches
Now also
compatible with
Winpilot (V2.1)
$1355.00
See
more:
LX Navigation
accessories for iPAQ
Copies of LX Navigation (Filser) manuals are available at links below:
LX5000 Manual in Word Format (earlier version)
Manual for LX5000 version 11.0
