TOTAL ENERGY PROBES & CAPACITIES

Wings & Wheels is the exclusive North American importer and
distributors for all

TE Probes and Multi function probes
by Erwin Saizinger
ESA Probes are available in very light weight rigid Carbon Graphite,
Aluminum and Multi-function probes in nickel plated brass.

Multi-Function
probes
TYPE UN
*
Multi-function probes and TEK RU/UN type probes require special sockets and pneumatic plumbing in aircraft

Multi-Function (Pitot-Static-TE) sockets $169.00


Multi-probe TE-Static-Pitot requires adapter typ: UN with
3 lines.
This adapter is now standard in all gliders from Alexander Schleicher and
also DG and in
the most glider from Schempp-Hirth. HPH will used them for the new 304S.
MNAI/UN (top) Aluminum, black finish probe 890mm O.A.L. with 2 hole TE
$335.00
MNI/UN (center) Brass Nickel plated probe 710mm O.A.L. with 2 hole TE
$269.00
MBR/UN (bottom) Brass Nickel plated probe 670 mm O.A.L. with Venturi TE
$279.00
Newest type from ESA-Systems
"DN/3fach/UN"
880mm OAL in Carbon Fiber
 
Outstanding results have been reported from users
of this new type probe available
exclusively from esa-systems
"click" on the image above for users
response
$358.00
MULTI-FUNCTION PROBES FOR PITOT-TE ONLY
Many gliders were delivered with 2 Function
PITOT-STATIC Tail probes
with Tail TE being superior to fuselage mounted probes and also lower drag,
many owners have requested a modified system to allow the ST-2 adapters to
function with Pitot and Total-Energy.
The special MNIA/UN (Two-Line) Probe does just this.


880mm OAL MUNAI-UN (2 Function) Multi-Probe
$246.00
RU Probes
are also available as TE only RU/UN 2 hole type TE installed in
UN type (multi-probe adapters.
pictured below:
TE Probe type TEKsonden RU/UN (top image)
TE probe type TEKsonden RU/ST(lower image) with adapter type for standard TE
6mm sockets

TE probe end on TEK RU/UN type probes

NOT SHOWN:
Also available
ST-2
Similar to below sockets for 2 Function probes
$182.00

Single Probe adapter socket
Please specify for 6mm or 8mm TE probes $39.00
Two-Hole TE Probes(RU)


The type RU is typically preferred in most
applications.
The Two Hole type RU probes supply a constant coefficient and adapt easily to most
sailplane types.
The type RU is normally the best type for flapped sailplanes as they fly with a smaller
angle of attack at most speeds than do standard class sailplanes.
Supplied in lightweight metal type of 800mm x 8mm diameter $149.00
Metal RU/ST 800mm probes for 6mm sockets $149.00
Venturi Type TE Probes
Found as standard equipment with many German
import sailplanes provide Excellent TE compensation though may be more prone
to skidding errors than hole or slotted type probes.


800mm and 880mm length Venturi TE probe for
6mm and 8mm sockets
$139.00
Special TE probes with double slotted TE receptors
 
For sailplanes with a rigid profile (Standard class) this type TE probe has
proven to be excellent.
The negative reaction of the angle of attack with this type probe
is even smaller than with the type RU.
DN/ST
Standard length 800mm and 880mm in both 6mm and 8mm diameter
sockets $169.00

Vertical TE Probes for fuselage
mounting.
outstanding quality construction and function
ESA-Systems Vertical Venturi TE Probe
6mm diameter, 29cm O.A.L.
alloy construction with mounting socket and "O" Ring
$125.00
ESA-System Vertical two hole TE Probe
6mm diameter, 30 cm O.A.L.
alloy construction with mounting socket and "O" Ring
$116.50
TE Mount Adapter for 6mm TE Probes
Provides a mounting method
for accepting the above TE probes
Could also be used for fin mounting of smaller (6mm) diameter TE probes
$34.00
ADDITIONAL TE PROBES
 
 
Extra length two hole probes for fin mounting in either 6mm
(plain end) or 8mm (with "O" ring) design. Extra long
930mm OAL as preferred by most current designers, made from 2 section
aluminum with step-down for stability and reduced vibration, with common
two-hole TE design. Very good quality, though not finished as nicely as ESA
probes but functionally similar.
made in Germany
Low cost $97.00
REMOVE BEFORE FLIGHT FLAG


Highly visible flags on 6mm or 8mm sockets (SPECIFY!)
Prevent mud daubers, other
insects, water and dirt from entering
probe sockets when glider is in storage or trailer
$30.00
PITOT STATIC TUBES

and at right, ESA Pitot/Static probe as used on some glider types
used with multi probe (2 source) adapters
$185.00 WINTER Capacity bottles

.45 liter for most mechanical variometers
and some electric variometers
$33.00
.90 liter for logarithmic and "S" model variometers
$36.00
|