CANOPY CARE AND REPAIR PRODUCTS
TO LEARN MORE ABOUT CANOPY CARE AND MAINTENANCE
"CLICK HERE"
MICRO-MESH® CUSHIONED
ABRASIVES
MICRO-MESH® THE NON-ABRASIVE
ABRASIVE
Micro-Mesh® is what we like to call a non-abrasive abrasive. It is
considered a cushioned abrasive in fact.
Conventional sandpaper is designed to be aggressive so that it will dig
deeply. In its manufacture the crystals are electrically charged so that
they will stand up. They are locked into a hard resin and when you apply the
paper to a surface it will literally tear in and remove the substrate of the
material you are sanding. The crystals cut in a negative raking motion,
leaving inconsistent scratch patterns.
Micro-Mesh® does the opposite. The backing is long lasting cloth to which an
ultra-flexible cushioning layer is applied. This cushioning layer will
determine how far forward you can push crystals before they will penetrate
the cushioning layer. On top of this layer, we have a very resilient glue,
not a hard resin, but a completely flexible glue that will hold the crystals
while allowing it to move and rotate. The crystals can turn in any direction
without coming loose. When you start to apply pressure to sand with
Micro-Mesh®, the crystals will go into the cushioning layer while beginning
to cut a bit. If you push harder, they will go further into the cushioning
layer, which serves as a safety valve. It determines how much pressure you
can exert in a doward direction. Instead of a deep scratch that sandpaper
makes, Micro-Mesh® produce a refined scratch that is close to a RMS of 1.0.
The cushioning layer also allows the crystals to cut with a planing motion
that leaves an extremely consistent scratch pattern and allows you to
achieve extraordinary levels of gloss.
Where conventional abrasives will take surfaces down 2 or 3 thousandths
(.002 or .003), Micro-Mesh® will take it down one ten thousandth (.0001) or
less.
LIGHT
DAMAGE DRILL KIT
FOR REMOVING SLIGHT DAMAGE
FROM ACRYLIC
This kit will remove minor scratches and scuff
from 100 square feet of acrylic.
Kit contains:
2-5" Loop back discs, MICRO-MESH 1500
2-5" Loop back discs, MICRO-MESH 2400
2-5" Loop back discs, MICRO-MESH 3600
1-5" Extra Soft hook face back-up pad with drill arbor
1-5" TufBuf lambswool polishing pad
1-5" White sponge polishing pad
1-8 oz. MICRO-GLOSS
1-8 oz. Anti-static creme
2-Cotton flannel cloths
$95.00
KR-70 ACRYLIC
RESTORAL KIT
note: this is not the small hobby kit sold elsewhere but a complete
hand polishing scratch removal kit for small acrylic jobs up to 30 square
feet.
Kit contains:
1-3" x 6" Sheet 1500 MICRO-MESH
1-3" x 6" Sheet 1800 MICRO-MESH
1-3" x 6" Sheet 2400 MICRO-MESH
1-3" x 6" Sheet 3600 MICRO-MESH
1-3" x 6" Sheet 4000 MICRO-MESH
1-3" x 6" Sheet 6000 MICRO-MESH
1-3" x 3" Foam Sanding Block
1-2 oz. Bottle MICRO-GLOSS
2-Flannel Cloths
1-Instructions
$29.00
Canopy/Window(Acrylic) repair products
FYI:
Tips
for solvent cementing acrylic sheet (link to website)
IPS Acrylic cement is a clear
water-thin liquid and is exceptionally fast setting for acrylics. Contains Methylene Chloride and
can be hazardous to health and should only be
used in controlled enjoinments with safety glasses for eye protection and
stored in a secure place. It is an exceptionally good adhesive for cracked acrylics and quickly
bonds broken or cracked acrylic ( tm
Plexiglas) canopies and windshields for a strong solid repair.
IPS Weld-On #3 Clear 4 oz.
Water-thin, very fast-set, shelf life: 3yrs. Non-flammable solvent cement
for bonding acrylics. Also bonds styrene, butyrate, PETG and polycarbonates
to themselves.
$11.00 * See shipping note below
Material Safety Data Sheet
*
It is assumed that you have read these warnings at the time you place any
order for chemicals
Craftics Clear Acrylic Solvent Cement
/ 80%
Methylene Chloride,
2-oz Bottle very much like the well
known IPS cement above.
Water-thin, fast-set, Shelf Life 3yrs. For joining acrylic, styrene,
butyrate, and polycarbonate and other plastics to themselves.
Apply by capillary method using Craftics Plasticators and Syringes
$6.00 *
* See shipping note below
Plastic Syringe
for applying acrylic adhesive with 22 ga. needle
$5.60
 
Thickened Cement #33,
1.5-oz tube
(a direct replacement for IPS Weld-On #16 which
is NLA )
Fast-setting high-strength, medium-bodied solvent cement. Bonds acrylics,
Rigid PVC, styrene, butyrate,
and polycarbonate to themselves and each other. As well as other plastics
and porous surfaces. Fills small gaps and dries clear.
$7.95 * See shipping note below
EVONIK INDUSTRIES produces a wide rage of acrylic products and chemicals
including
a long list of Acrylic repair and bonding products. W&W tested several
products from different suppliers and selected one
above all others in particular was superior or useful for mechanics and end
users for acrylic repairs. Many other acrylic products we already offer are
equal or better than some Evonik products due partly to some
envoirmental restrictions
in Germany but ACRYFIX 2R0190
acrylic cement used withthe hardener (Catalyst) CA 0020 was a superior
product to others. Testing acrylic bonds with this product produced ultra-strong bonds that could with
enough skill and patience make a relatively clear smooth repair.
ACRIFIX 2R0190 X
4oz (+ catalyst) - VERSATILE (hardner)
The ACRIFIX once set can be sanded and polished and
good repair was accomplished
(see image) This vent window was cut with a saw then the cut sanded to a
V-groove and filled with ACRIFIX, afterwards the hardened repair was quickly
sanded and polished, some air in the cement is visible and the polishing was
only quick
and dirty so better results may also be had with more time and effort.
$21.75 set
*
It is assumed that you have read these
warnings at the time you place any order for chemicals
2R 0190 Material
Safety Data Sheet /
2R 0190Tech
Sheet
CA0020 Material Safety
Data Sheet /
CA0020 Tech Sheet
*Ships by ground only, Cannot ship outside the USA or in the USA to the
following California
Counties: LA,Orange, San Bernadino, Riverside
CANOPY CLEANERS
AND POLISHES
 Conventional Plastic
Cleaners
Plastic-cleaning products have often proven to be less than
satisfactory.
Existing cleaners are often messy to use (especially creams and pastes) and require
several steps to apply. They have to be rubbed on and buffed. They often leave a sticky,
tacky or oily residue. And, in many cases, they're abrasive, leaving small lines in the
plastic.
Dissatisfied with these cleaners, many people resort to products that are alcohol,
ammonia, or petroleum-based. Unfortunately, these products can dry out plastic, leading to
cracking and
discoloration over time.
Using the products specifically designed for acrylic (plastic) canopies, windshields and
windows
can help to prevent these problems and even improve some conditions.
New Sontara window wipes
Made of a proprietary blend of fibers that are softer than most
conventional wipes. Since many scratches are caused by grit and dirt already
on the surface of the window, this product features aperatures that help
pick up and remove dirt effectively. Using LP Aero Plastics Acrylic Polish
and Sealant to "float up" the dirt before wiping is the best way to minimize
the risk of scratching.
Nothing Takes Off Dirt and Grit Like
Rugged New DuPont Sontara AC Window Wipes and LP Aero Plastics Acrylic
Polish and Sealant.
convenient packs of 20 each $10.50
or complete case lots (inquire)
LP ACRYLIC POLISH & SEALANT
I'LL GUARANTEE THIS TO BE THE BEST CANOPY
POLISH/CLEANER YOU'VE EVER TRIED
......OR I'LL GIVE YOU YOUR MONEY BACK!
A superior no-wax, non-yellowing formula containing polyethylene polymers.
This superior product not only gives a super slick surface to your windshield and windows,
but can also be used on your entire aircraft, including all the painted gloss surfaces,
aluminum and fiberglass. Ease of application and removal is unmatched.
LP Liquid Polish
Not the tiny 4-5 oz bottles like others see but in
large 16 oz. bottles for just $15.95
210 Aerosol Plastic
Cleaner/Polish
For those who prefer the convenience of an aerosol spray without the
high polish of LP liquid 14oz....$14.95
210 PLUS Plastic Scratch Remover.
A fine liquid abrasive for removing fine scratches. Following
with LP Acrylic Polish Sealant is recommended.
15oz. Squeeze bottle...$15.95
also available
 
It just doesn't get much easier or more convenient than this!
CLEANS. Powerful, safe cleaning without abrasives.
PROTECTS. Seals the pores of the plastic, keeping out contaminants and
harsh chemicals.
QUICK. Spray on and wipe off application reduces man hours.
CONVENIENT. Aerosol can stores without evaporating and delivers exact
amount intended.
EXTENDS WINDOW LIFE SPAN. Decreases window replacement frequency,
reducing life cycle costs.
ANTI-STATIC. Stays cleaner, longer.
APPROVED FOR USE. Approved by aircraft window manufacturers.
13oz Aerosol spray $16.95
WAX and POLISH
BUFFING / POLISHING TOOLS
MODEL 5/DUAL HEAD POLISHER
easiest to use for professionals and
non-professionals alike!
 
Get professional results!
Video.....See
it in action!
Swirl Free Finish on Black Paint
Headlight Restoration
http://www.cyclotoolmakers.com/support.php
The Cyclo Orbital Polisher has been polishing planes,
automobiles, and RVs since 1953, when they received patents on their orbital
polishing mechanisms. That same year, the company received approval from the
US government to polish the military’s aircraft and missiles. The Cyclo
Polisher is still used today to polish the Air Force One fleet. With a
resume like that, we just had to see what the Cyclo is all about. The Cyclo
Polisher is the only dual-head polisher on the market. Both heads move in an
orbital motion, counter-clockwise. The idea is to simulate hand polishing
but at a much faster rate. Going over a scratch or swirl with both heads
ensures that you are attacking it from all sides, so to speak. No matter
what angle you look at the paint, you will not see the former blemish. It’s
the fool-proof polisher!
 TWO
HEADS ARE BETTER THAN ONE
The synchronized movement of the Cyclo Polisher’s dual orbiting heads most
effectively mirrors the overlapping circular motion of fine hand polishing.
The result is a perfectly balanced machine that produces less vibration and
a mirror-like finish without swirl marks or risk of damage to paint.
Because of its dual headed orbital design, its polishing heads do not remain
in one spot—even if the polisher is held in a stationary position. As a
result, there is no heat build up. No burning, marring, gouging, or swirl
marks can occur. Even a novice can produce professional-looking results
without the risk of damaging a vehicle’s trim pieces or finish.
http://www.cyclotoolmakers.com/index.php
Model 5 Dual Head Orbital
Polisher/Scrubber/Finisher/Shampooer, 115VAC
The synchronized movement of the Cyclo mirrors that of hand rubbing – an
overlapping circular motion. And the Cyclo’s twin heads don’t
spin in one
place, so there’s no threat of heat build-up or burn marks. The Cyclo
continues to be the polisher of choice for aircraft. In fact it's currently
used to polish the Air Force One fleet and most major airline fleets
worldwide. The Cyclo delivers a superior polish on mainstream products such
as automobiles, boats, even Airstream™ RVs. Car dealerships, automobile
detailers, car washes, and fleet users all rely
on the Cyclo to keep their
vehicles looking like new.
Cyclo Polisher Product Sheet (PDF)
Cyclo Polisher Instruction Manual (PDF)
Polisher is complete with velcro pad holders,
counter weights and tools
Just add your selection of polishing pads
$275.00
Buy a Cyclo Model 5 polisher and get
WX/Block Wx/Seal combination package
for only $319.95!
 
VES Silver Weighted Insert
(20-076)
For use with DoublePrecision
adapter and pads and scrub brushes.
VES Yellow Weighted Insert
(20-078)
For use with head assembly with bonnets or rubber pad holder with pads.
L Hex-Key Wrench (85-820)
VIBRATION ELIMINATION SYSTEM
Cyclo Toolmakers, Inc. Vibration Elimination System (VES™) is available
exclusively on Cyclo Dual Head Orbital Polishers and is composed of a
completely redesigned counterweight and precision matched, weighted inserts.
Prior to this innovation the Cyclo Model 5 polisher imparted only about
one-tenth the vibration of traditional rotary and dual action polishers.
With the introduction of the new Cyclo VES, the amount of vibration is
reduced even further and nearly eliminated.
Cyclo VES Counterweight:
Completely reengineered, the Cyclo VES counterweight comes installed on all
new Cyclo Model 5 Polishers.
VES will be available for Model 5C and 6CE polishers starting in 2009.
Cyclo VES Weighted Inserts: By simply matching the correct VES
weighted insert to the intended attachment system configuration -
head assemblies with Rubber Pad Holders or bonnets, carpet and scrub
brushes, Quick Connect Adapters with DoublePrecision™ pads, or other Genuine
Cyclo attachments - you can nearly eliminate all vibration.
FOAM Polishing pads
 GREEN
POLISHING PADS
RECOMMENDED APPLICATIONS: • Sealant • Paint Polish • Paint Cleaner • Metal
Sealant A more aggressive pad than our white or blue pads. The pore density
makes it perfect for polishing and removing light oxidation for a stunning
shine.
 YELLOW
CUTTING PADS
RECOMMENDED APPLICATIONS: • Paint Polish/Cleaner • Paint Deox • Paint
Compound • Paint Scratch Remover A firm, versatile pad that can be used on
everything from compounding and scratch removal to applying paint cleaners
and polishes.
 WHITE
FINISHING PADS
RECOMMENDED APPLICATIONS: • Extreme Shine • Final Wax Buff • Wax Application
• Sealant • Metal Sealant This superfine pad is used in final buffing, after
polishing with other pads.
 ORANGE
COMPOUNDING & POLISHING PADS
RECOMMENDED APPLICATIONS: • Paint Polish/Cleaner • Paint Deox • Paint
Compound • Metal/Chrome Polish An exceptional, all-in-one cleaning and
polishing pad. This high density pad has the power to remove lights
scratches and polish the surface.
All featured pad types just $6.00 each (2 required)
CYCLO WOOL PADS
WHITE WOOL THE ORIGINAL CYCLO CUTTING WOOL
Metal Polish/Cleaner • Paint Deox • Paint Compound • Paint Swirl Removal
The preferred multipurpose wool/poly pad, used for metal polishing and
aggressive paint compounding. This pad is excellent for removing swirl marks
and scratches.
YELLOW MEDIUM CUTTING WOOL
Paint Polish/Cleaner • Paint Deox • Paint Compound • Metal/Chrome Polish An
exceptional, all-in-one cleaning and polishing pad. This high density pad
has the power to remove lights scratches and polish the surface.
BLUE POLISHING WOOL
Paint Polishing • Paint Cleaner • Finishing Touch Used for applying the
finishing touches on most automobiles. A blend of 70% acrylic and 30% wool,
this wool pad is perfect for creating a fine luster on nearly any finish.
  
All Wool Pads $6.00 each (2 required)
 
Microfiber Terry Pad Cover
fits over foam or wool pad
RECOMMENDED APPLICATIONS Final Wax Buff
The preferred cover for applying polish and buffing wax. Its hooked fibers
remove surface residue
More Info
Pad Cover (73-530)
$7.30 pair
Rubber pad holders
Part# 79-101a
Rubber base with Velcro hook material that fits
over Cyclo polisher heads and allows the attachment of any of our Velcro
loop pads in addition to the 600 grit Fast Cut Pad. Two per machine are
required, and they will last for months of continuous use.
(2 included with
MODEL 5/DUAL HEAD POLISHER)
$10.00 each
The PERFECT Tool for applying Wx/
Block and Wx/Seal!
Save! 25% off Wx/Block and Wx/Seal Package with
the purchase of a
MODEL 5/DUAL HEAD POLISHER!
New improved Wx/Block now features
the latest nanotechnology
after a long delay and 100's of back-orders
Weather Block (Wx/Block) and Weather Seal (Wx/Seal)
is on the shelves and shipping again!
Wx/Block-Wx/Seal
(weather block- weather seal)
NOW EVEN BETTER!!!
You loved it before........you'll love it even more now!
Premium Protection for Sailplane Finishes
New improved Wx/Block now features the latest nanotechnology to enhance the
gloss and longevity
of sailplane gel coat finishes.
This premium finish protection contains maximum levels of UV
protection along with gloss enhancing and anti-static surfacing agents for
gel coat . finishes. Wx/Block helps maintain a high level of sailplane gel
coat integrity by reducing the effects of environmental exposure.
Nanotechnology Improves Performance
The inclusion of nanoscale particles in Wx/Block and Wx/Seal improves
smoothing and levels the microscopic inconsistencies on gel coat
surfaces.Leveling of the surface topography results in a higher gloss and
better sealing of the micro-porosity present in all gel coat finishes. The
nanoscale formulation improves the refectivity of gel coat surfaces
resulting in increased gloss values and provides better retention of UV
active inhibition for improved performance.
Gel Coat and the Sun
Gel coat finishes are subject to chemical processes driven by exposure to
ultraviolet solar radiation ,this incudes photo-initiation and
photo-oxidation. The process of photo-initiation causes chemical changes in
a micro-thin surface layer of gel coat while photo-oxidation degrades
surface molecules.Sunlight and reactive atmospheric compounds will yellow
and embrittle gel coat over the length of exposure. While traditional hard
wax or consumer type waxes will polish gel coat, their UV protection is
limited. Wx/Block’s solution is to provide active UV protection on the
surface for an extended period of time.
Wings & Wheels made an exclusive agreement with the
manufacturers of Wx/Block
to make this great product for sailplane owners and
owners of other
*gel coated composite aircraft.
Wx/Block and Wx/Seal products are available ONLY through Wings & Wheels
This might explain why the only
people who don't recommend Wx/Block and Wx/Seal are some glider
products dealers who cannot offer it!
Used and recommend by hundreds of satisfied customers,
sailplane repair shops and gliderport operators.
* Though Wx/Block was developed to improve the
durability and life span of sailplane gelcoats it is also a terrific product to use on
other materials and finishes. Wx/Block provides UV and moisture protection not commonly
found in other waxes and polishes.
 Wx/Block and Wx/Seal are specially formulated to protect Sailplane Finishes. The
surface protection contains maximum levels of UV inhibition, along with gloss enhancing
and anti-static surfacing agents SPECIALLY designed for gel coat finishes. Wx/Block was
designed to help maintain a high level of gel coat integrity by reducing the effects of
environmental exposure. Wx/Block is completely safe for all gel coats, polyester based
finished (Prestec or Duratec) or urethane paint finishes.
The Wx/Block block system is extremely easy to apply, just wipe on and hand buff for an
outstanding gloss finish. Wx/Block is also perfect for daily clean-up and bug removal.
Wx/Block and Wx/Seal is an easy to
use 2 part system. First, Wx/Seal is applied as a surface sealing and cleaning
compound, which conditions the surface. All Gel coats contain microscopic porosity. The
Wx/Seal cleans residual dirt and wax from the surface and seals these porosity's actually
helping the Wx/Block adhere to the surface. Wx/Seal may be applied by hand or if you
prefer by machine. Finally, Wx/Block is applied by hand which contains the UV Blocking and
Anti-Static agents which help to protect the finish. These agents also produce lower
surface tension than standard waxes and reduce the severity of bug sticks and dust
accumulation.
Combination Wx/Block & Wx/Seal (1 Quart each)
$59.95
Just $44.95
when you buy any Cyclo
MODEL 5/DUAL HEAD POLISHER
Wx/Block or Wx/Seal .... $35.00 Per Quart
Combination Wx/Block & Wx/Seal (1 Quart each) $59.95
(combination package is enough to do two 15 meter gliders)
(Wx/Block only available in Quarts)
Wx/Block and Wx/Seal are both 100% free of Silicone
for more information
go to :
Technical report:
Enhancing Gel Coat Longevity
With Advanced Surface Chemistry Technology
and also read:
Wx/Block Brouchure
USER COMMENTS:
Not meaning this as
advertisement but I want you to know what we have observed
on a refinished LS-3A. One expects UV to attack the upper surfaces of a
glider. Normally, the upper surfaces tend to fade and "yellow" more than lower
surfaces. The owner of this LS-3 used "weather block" on the upper surfaces
only and we can see...with no doubt, that the upper surfaces are in better
condition after about 5 years. The lower (un treated) surfaces are now an
"off-white" (or yellowed slightly) while the treated upper surface is a nice
"blue-white" . You can come to any conclusion you want...but this Weather
Block" stuff does make a difference in protecting a fiberglass Gel-Coated
finish....End of advertisement...Regards, Bob
Hard Bar (Wax?)
You may hear a lot about "Hard Waxing"
but what most don't know is that hard bar was is really not intended as a wax at all,
hard bars do contain a wax as a base but these are
really polishing compounds, the wax used is there to contain the fine
abrasives used for polishing, much the same as "Jeweler's
rouge" . Applied with a machine only, on
sailplanes a special edge buffer is used and it is still a favorite method by many
repair shops.
Machine polishing hard bars do provide excellent polishing, and
provide a high shine since
the surface is highly polished to a super smooth finish. Hard Bars however
provide little real moisture protection and will offer virtually nothing in
the way of UV protection. Each Bar should be enough for complete polishing
of one or two gliders when properly applied. The special edge type buffer is
required for
proper application of all hard bar waxes. Hard Bar Finishing should always be followed up
with a minimum of a good wax for moisture protection and for the best UV and
moisture protection with a product like or at best, the Wx/Seal and Wx/Block
products.
German import
schwabbelwachs (Polishing wax)
our coarsest bard wax (much like jewelers polishing rouge)
1 bar, ca. 900 g
$30.00
Professional high-gloss polishing/finishing
HARD BAR WAX/POLISH
Menzerna Compounds
The very best!
made in Germany
The same residue-free compounds used at Fender,
Gibson and other top guitar manufacturers and repair shops.The
Menzerna company has been making abrasives and polishing compounds since
1888. That's one year before Gottlieb Daimler founded Daimler Motoren
Gesellschaft, the company that was to become Mercedes Benz! Today, Menzerna
is the largest supplier of polishes and compounds to Germany's automakers.
Menzerna is a family-owned company recognized as a world leader in abrasive
and polishing technology.
Amber M-W16*
finer high gloss compound for polishing
3 pound bars $24.95
White M-WATOL6*
Very fine, highest gloss finish polishing $21.95
*for edge buffer applications
Now also in
paste for hand and conventional automotive buffers
and orbital type
buffing wheel application.
2L Pre-Polish Compound (#1) is for initial compounding, where you remove
the scratches left by wet or dry sandpapers (it will remove 800 grit
scratches on up). This is followed by 16 Fine Polishing Compound (#2). This
will leave a mirror surface. All products can be applied by hand with a soft
cloth or buffer, after the initial flattening and leveling of the finish is
done with sandpaper. The finish should be sanded to at least 800 grit before
applying the 2L.
2L PASTE PRE-POLISH COMPOUND #1
(750 gram or 1.65 lb.) Plastic Tub $16.95
16 FINE POLISHING COMPOUND #2
(750 gram or 1.65 lb.) Plastic Tub $16.95
FYI:
Removing old tape residue
I don't offer
this since it is flammable and could be classified as "hazardous" for
shipping (extra cost to you) you can almost always find it locally at most
auto parts stores, hardware stores and paint suppliers for about ten bucks a
quart. Some companies offer their own "brand" like NAPA Auto Suppliers. This
is the BEST adhesive cleaner I have ever used for removing old tapes, tape
residue and is completely safe for almost any painted or gel-coated finish.
Buy it locally.. always keep some on hand! |
Browse
the catalog
