CANOPY COVERS, WING TIP SKIDS,
CONTEST AND REGISTRATION NUMBERS,
LOGO’S, DECALS AND FLAGS


CANOPY COVERS
Platinum Series Canopy Cap

cover is designed to be a light weight, compact reflective shade cover for use when rigging and while waiting on the grid. The strapless design allows easy access to the cockpit during assembly. When you are ready for launch, slip the cover off and stow it in the included storage bag, in the cockpit while you fly. It is not meant for extended use
outdoors or while trailering as it won’t allow the canopy to be locked when it is on the glider. I have attached two photos to give you an idea of how it works. 
How to use the Platinum Series Canopy Cap

Find the care label near the center seam. This is the front of the canopy cover. Place the rear of the cover over the back of your raised canopy and hook the elastic around both rear corners. Pull the cover forward and hook the elastic around the front of the canopy and at both front corners. Straighten the center seam to align down the middle of the canopy and adjust any wrinkles along the sides until smooth. You can now raise and lower your canopy at will during set up and while on the grid. There are no inconvenient straps to get in the way!

Schempp-Hirth-B PLATINUM SERIES CANOPY CAP

Schempp-Hirth-B as seen on PIK-20D

After testing numerous prototype covers, we feel we have come up with the best design for the side hinge canopies.
The solution was to add an interior strap with miniature quick release buckle which holds the cover firmly in place yet is still quick to install and remove.
SEE: How to use
Schempp-Hirth-B PLATINUM SERIES CANOPY CAP
on this link
 Our cover is designed to be a light weight, compact, reflective shade cover for use when rigging and while waiting on the grid. The simple design allows easy access and your cockpit is always shaded and cool. It is not meant for extended use outdoors or while trailering as it won’t allow the canopy to be locked when it is on the glider. When you are ready for take off, slip the cover off and stow it in the included storage bag, in the glider while you fly.

We currently offer covers to fit the following gliders:
ASH 25, ASW 19, 20, Pegase (Sun Shield option available), ASW 22 (Sun Shield option available), ASW 24, 27, 28, ASG 29 (Sun Shield option available), ASH 26 (Sun Shield option available)
DG 202, 300, 400, 600, 800 (Sun Shield option available)
LAK-17 (Sun Shield option available)
 LS 3, 4, 6, 7, 8 (Sun Shield option available)
Mosquito,Hornet "C", HPH 304 (Sun Shield option available)
Diana, Diana 2
 Apis, Silent
Genesis 2
 SZD 55 (Sun Shield option available)
Schempp Hirth A, including Discus A, Discus 2A, Ventus A, Ventus 2A, Schempp Hirth B, including Discus, Discus 2, Ventus, Ventus 2, Nimbus 2, 3 (we have heard that the “B” cover fits the PIK 20 well)
$96.00
PLUS Canopy Cap for ASH-25 (no sunshield option) $168.00
custom "made to order" specifically for each glider type
Usually "drop-shipped" direct from manufacturer $10.00 extra

Optional rear sunshield flap
available on most forward hinged canopy covers


shown on 304CZ
with
Optional rear sunshield flap $116.00
custom "made to order" specifically for each glider type
allow 2-3 weeks for delivery or for rush shipment add $10.00

 

Contest  and Registration

PROFESSIONALLY DIE-CUT, COMPUTER DESIGNED VINYL CONTEST NUMBERS
 AND LETTERS, "N" NUMBERS.
YOU INSTALL EASILY WITH PROFESSIONAL RESULTS
Thinner than most Paint, Permanent yet Easily Removed
Examples: Dare to be different!
 


COLORS AVAILABLE:

Red, White, Navy Blue, Royal Blue, Black, Purple, Yellow, Gray and Green and more
PLUS: Metallic, Metal flakes, Florescence available.
Note:
Normal Block letters similar to the illustrations will be supplied in an Arial type font unless another font is otherwise specified. Please also consider before ordering
that some very fine or detailed font types can be more difficult to apply.

Please supply the font type if you wish something special using normal FONTS as typical in MS WORD or other common format.
N304CZ   1M 1M    N204T
CE CE
  N1971S  OU OU   N17EW  
 
ZZ ZZ   N65J

COMPLETE SETS ONLY $73.00
Set includes (4) 12"  (2) 24" Contest Number
  and up to (12) 3" N-Number digits
also available separately
3" $.85 each
12" $9.00 each
18" $12.80 each
24" $17.50 each


EXPERIMENTAL
EXPERIMENTAL
EXPERIMENTAL
2" "Experimental"  Vinyl transfers in blue, black or red.
(required by FAA regulation to be placed in or on all
aircraft flying in "Experimental" category in a conspicuous location)
$16.50 each

Glasflugel Logo


Libelle Tail decal in Red or Navy Blue $10.00 each

Libelle "Script" logo  in gray $6.00 each

 

Flag Decals
(Vinyl Transfers)
for aircraft, sailplanes or trailers
approximate sizes 4" x 6"
$12.00each

Flag USA.gif (4978 bytes)  wpe31654.gif (59920 bytes) Flag Czech Republic.gif (3217 bytes)
wpe67993.gif (25544 bytes) 
Flag Sweden.gif (3317 bytes) Flag Switzerland.gif (2651 bytes)

38
goto the previous page Browse the catalog goto next page
Back to Index