RE-SETTABLE WATER METER
Electronic Digital Water Meters
Simple - Small - Sturdy

This meter easily installs either in-line at at the end of a hose.
The Large, easy-to-read display and compact lightweight design of rugged nylon and sealed
electronic circuitry guarantees years of service life in almost any condition. Tow AAA
batteries power the small microprocessor for a year and are easily replaced.*Calibrated at
the factory to accurately measure water (*not for fuels)
Simple hose fittings (optional)

$1.50 each
these and some other types are also available locally at most plumbing
suppliers
DO NOT USE THIS METER FOR FUELS OR THE ERNST DIGITAL FUEL METER FOR
WATER AS THESE VARYING LIQUID WEIGHTS WILL CREATE CERTAIN INACCURACIES IN MEASUREMENTS.
*Works well on any pump, pressure, or gravity feed system from 3 to 30 GPM
(10-100LPM)
flow range.
Flow Range: 3-30 GPM
Rugged Construction
Designed for Indoor/Outdoor Use
Digital Display with Large 1/2" Tall Digits
Approximate Battery Life is 9,000 hrs
Gallons
Liters
Model:
318 01 N100
318 01N100LM
Max.working pressure 100 psi
10.3 bar
Weight
0.4 lbs.
190 grams
Dimentions. 4(W)x2.5(H)x2(D)inches 10.2(W)x55.1(H)x5.1(D) cm
The ideal meter to use when adding water ballast to almost any sailplane.
This simple and accurate (typical accuracy is within +/- 2.5%but can vary to +/- 5%)
weighs less than 1/2 pound and is adaptable to any garden hose. The water meter is
electronic and operates with flows as low as 3 GPM and may be reset to zero
after each use......$159.95
NON RE-SETTABLE WATER METERS
DLJ Multi-Jet Water Meter
Low cost mechanical water meter with 1/2" pipe thread fitting
 
Accuracy within 1-1/2% - Proven Multi-Jet
Water Meter Design, Dry Dial won't discolor or fade- hermetically sealed
from the elements.
Tempered Glass Lens for continued readability , Magnetic Drive - water is
sealed from entering register.
Large Pointer on Dial for indication by 1/10 of a gallon, Low flow indicator
for flow rates down to almost drop by drop
Odometer type totalizer to 9,999,999 gallons on our small meters, Frost
Resistant Bronze Body - forged for strength and pinhole avoidance, Sealed
Regulator port - preset for accuracy at factory Each meter marked with year
of manufacture and serial number
Integral Strainer in register chamber
Supplied with (2) 1/2" pipe adapters (lower right in image above)
$69.95
1/2" Pipe to 1" Hose adapters (pictured above left) optional
$4.45 each*
1" Hose shut off valve (pictured above left) optional $6.55*
*also available locally at most plumbing suppliers
Water Meters
With
Garden Hose Thread Inlet & Outlet

This water meter features an
easy-to-read odometer type reading in single gallons (down to the tenth) and
an additional rotary dial with a sweep hand reading one tenth of a gallon
per revolution with graduations down to 1/100 of a gallon (1.28 fl oz).
Total registration on the water meter dial is up to 10 million gallons, but
the meter will last much longer than that.This meter is quality constructed
of nickel plated waterworks bronze according to ISO 4064 standards for
accuracy, quality and length of service life. This water meter conforms to
or exceeds all published US and European accuracy standards and will
reliably detect usage down to a hundreth of a gallon.
model with garden hose
swivel adaptors
$79.95

1" Hose shut off valve (pictured
above left) optional $6.55*
*also available locally at most plumbing suppliers
|